D
diamondgas
not sure was it a wall mounted?
Yeh wall mounted, as said it had the old apollo 80 BF bellow it and an add on pump, diverter and weird little cylinder thing blue i think it was heat-ex
Discuss Worst boiler to work on competition in the Plumbing Jobs | The Job-board area at PlumbersForums.net
not sure was it a wall mounted?
i think i know what your on about it was a right bitsa if its the same heap,nasty shed of a thingYeh wall mounted, as said it had the old apollo 80 BF bellow it and an add on pump, diverter and weird little cylinder thing blue i think it was heat-ex
Chaff Britony , look after loads of these still, I like um! Not a great boiler but everything is simples and relatively cheap to fix... Wouldn't have one in my house though!The later SE isn't bad though!Neither are any more plasticy than a green star junior!its a chaff in disguise plastic everywhere
yes but i dont like greenstars either mind baxis 133 he is far,far worstChaff Britony , look after loads of these still, I like um! Not a great boiler but everything is simples and relatively cheap to fix... Wouldn't have one in my house though!The later SE isn't bad though!Neither are any more plasticy than a green star junior!
i think i know what your on about it was a right bitsa if its the same heap,nasty shed of a thing
For me (oil) it's a toss up between the Grandee and the vintage Trianco Centajet
my pet hate is glowworm and the long history of nasty plastic parts, which fail..... and my heart sinks when i see an old vailant... not the parts...it's getting the buggers off the wall, they weigh a ton and have to be dismantled..
As above, whats the worse part/boiler you've had to work on and why? (no detail into gas safety as it's in the wrong forum!)
personally for me, after today i'm voting Worcester CDI expansion vessel. Wasn't much left in it once I got the old one out, fan, heat ex, plate hex, pump, APS etc all removed.... nightmare! Normally fit an external in, but couldn't on this one.
I have just taken delivery of a Vaillant Eco-Tec 'dummy' boiler - Centralheatking
My first is the Alpha Ocean Style FF, if you went at one O-ring you would have to replace all the O-rings, changing the O-rings could take 30 minutes or 4+ hours depending how lucky you were, it would get so that your tears matched the drips from the O-rings, my second would be the servowarm boiler with the rad on the front because swinging the rad out always felt wrong.
Reply to Worst boiler to work on competition in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.