Search the forum,

Discuss Worcester 25si or Viessmann Vitodens 100 26kw? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sunflowers8

Hi

I've decided to install one of the above combi boilers and wondered if anybody has any thoughts on either and advise which, in your opinion, is the better option, please?

Many thanks.
 
Hi. When you say 'install' do you mean hang on the wall yourself or have a GSR install for you?

My preference would be the V but it really depends on your requirements.
 
Go for a Viessmann, not that I've worked on them but they get good reviews :)
 
I'm off worcester gas combis at the moment. To many leaking heat exchangers, electrical faults and cut hands. No experience on viessman but I hear good things. I'm giving atag a go where space allows!
 
Hi. When you say 'install' do you mean hang on the wall yourself or have a GSR install for you?

My preference would be the V but it really depends on your requirements.

Haha I wish I could install it myself but sadly not.

I have a small 3 bedroomed, 1 bathroom house.
 
Stan u fitted many wb filters? Never fit wb anymore but filter and conny warmer looked ok
 
no , never fitted even one tbh ! I have installed many magnaclean 2 and the new one ! Just the look of the wb one is making me not to even think about installing it ! I did quote on a job to install one as boiler was going to be fitted in utility room , but guess what .....did not get the job :)
 
Hi. When you say 'install' do you mean hang on the wall yourself or have a GSR install for you?

My preference would be the V but it really depends on your requirements.

Haha sadly I'm not that skilled!

I live in a three bedroom semi with one bathroom.

Have had quotes of ÂŁ1,800 for them both which includes a clean, filter and digital stat.

I note the the comments made about WB and wonder why all the plumbers who've been round and have all rated them top?
 
Simply because there customer service is excellent and boilers are really well build !

I dont say Viessmaann are bad just personal choice always is WB !
 
Viessman or ideal logic I could not bring myself to soil my hands with a plastic fantastic wb yuk.:smug:
 
Agree , definitely not wb - fitted my first Veissmann before Xmas, the 100w system boiler and was very impressed with it.
 
Only thing that puts me off the viesmann 100 is the rubber hoses on primary hex, they seem to attract sludge to them like a magnet.
 
Only thing that puts me off the viesmann 100 is the rubber hoses on primary hex, they seem to attract sludge to them like a magnet.

People slating Worcester lol, but the viessman has rubber hoses lol?!! We all know what happened to vaillants leaky rubber hoses...
 
I've been fitting viessmann 100w's for a few years, and yes the rubber hose would be my only real criticism. But I've only had one go around a year after installation. But 7 year warranty which is extendable to 10 isn't bad!
 
I do like the condense/ prv on the WB1C and wish more manufacturers would do this.
 
I do like the condense/ prv on the WB1C and wish more manufacturers would do this.

Not sure this complies with installation standards. Thought PRV discharge had to be in metal to withstand pressurised steam and condensate had to be in plastic due to the acidic nature of condensate.
 
Hiya sunflowers8 your question is often asked and all the experienced fitters below will give you their honest opinion based on their wide practical experience.

However as you are not qualified to fit my advice is thus -
1. Dont tell the c/h outfit you choose what boiler to fit its up to them !
2. get a few quotes from local fitters - some on here maybe
3. Make sure your fitter is registered and maybe affiliated to the manufacturer
of the boiler he recommends then you will get extended cover

If you qualify you may get a one free-

but as you asked I dont do models of boilers but tend to go for a brand -
Vaillant all day long...no comebacks from my point of view as an installer

........... Centralheatking
k
Hi

I've decided to install one of the above combi boilers and wondered if anybody has any thoughts on either and advise which, in your opinion, is the better option, please?

Many thanks.
 
I note the the comments made about WB and wonder why all the plumbers who've been round and have all rated them top?

Despite the cynicism of the forum members sunflower, Worcester Bosch continue to be market leader for the nth successive year, with a market share significantly greater than their nearest rivals.

You have picked little and large here - Veissman's turnover in the UK is vanishingly small compared to Worcester. Inevitably, engineers will come across many more failed worcesters than failed viessmans - simply because the installed base of Worcesters is 100 times larger.
 
They're both made of expensive German plastic!!!!. Viessman 100 has as well very long rubber hoses.
Go for the Viessman 200, expensive but better built.
 
Thanks again so much for all your comments. Invaluable as always.
 
I might be fitting a freebie in a close relatives on the Eco. To be honest am in two minds really, he was going to buy a Valliant but he qualifys for this now
 
Status
Not open for further replies.

Reply to Worcester 25si or Viessmann Vitodens 100 26kw? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
218
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
227
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
283
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
452
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock