- Messages
- 5,171
Prices. Anyone know if the survey has been published yet?
- Thread starter mutley racers
- Start date
- Replies 43
- Views 284
- trade williams
Discuss Williams and Co trade... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
W
Welder
which one?
- Messages
- 5,171
Didn't know there were others? I just got an email saying to fill in a survey and it will be published in hvp in January I believe
- Messages
- 5,171
You see my message about your tap kit and the ideal valves?
W
Welder
No! Where?
- Messages
- 5,171
It was on the thread about removing back to wall bath taps
W
Welder
Got no chance! I've been asleep since...
Unf my focus has been:
- designing our show stand
- sourcing parts for said design
- packing kits for the show
- designing brochures
- sourcing said brochures
and lastly helping explain ins and outs of bloody water flowing down placcy pipes when it's a bit nippy
- Messages
- 34,370
- Solutions
- 2
Yea it was published I think think I saw it in Williams blog
- Messages
- 5,171
Williams blog, didn't know they had one. That on the website
- Messages
- 5,171
Got no chance! I've been asleep since...
Unf my focus has been:
- designing our show stand
- sourcing parts for said design
- packing kits for the show
- designing brochures
- sourcing said brochures
and lastly helping explain ins and outs of bloody water flowing down placcy pipes when it's a bit nippy
Busy bee then.
Well, would I be able to repair so these taps with your kits cheaper than the cartridges here.
W
Welder
I'd say so yes. You'll be paying approx half their cost.
- Messages
- 5,171
Nice. Where do I buy this kit then
W
Welder
- Messages
- 5,171
You are kidding me right!
Not really. I have seen it before but have forgot where. Don't really want to search on net again
- Messages
- 10,442
Clearly not mate. Tell us more about this awesome and wonderful product. What’s it called? Is there a website? What can you do?You are kidding me right!
W
Welder
It's not for you then Mutley. I'm afraid it won't do the job for you.
Best stick with the website you found as it'll be simpler for you.
Best stick with the website you found as it'll be simpler for you.
- Messages
- 10,442
Long day in Sheffield @YorkshireDave ?It's not for you then Mutley. I'm afraid it won't do the job for you.
Best stick with the website you found as it'll be simpler for you.
W
Welder
Long day in Sheffield @YorkshireDave ?
No. Very enjoyable & very successful, ta. Another merchant chain on board.
Yet more people enjoying the physical making, sense of pride and satisfaction of demonstrating professionalism in their choice of solution.
- Messages
- 5,171
Ah ha, tap medic
W
Welder
- Messages
- 12,702
Coming to a trade show near you at the end of the month, see before you buy mate @ show price.
- Messages
- 5,171
If Lee isn't sure, he'd be best off with a 6PAQ. When he gets more adept then he can upgrade to the shiny, Shauny, Pro version
That was going to be my next question. Thanks
- Messages
- 5,171
So to make some cash on these I would have to charge £20 a cartridge. This sound about right
- Messages
- 34,370
- Solutions
- 2
If Lee isn't sure, he'd be best off with a 6PAQ. When he gets more adept then he can upgrade to the shiny, Shauny, Pro version
dont you mean the very empty shaun version
- Messages
- 34,370
- Solutions
- 2
charge same price you posted
- Messages
- 12,702
But you are going to charge more aren`t you? Much more in some cases.
W
Welder
You can charge what they are worth. If the one you are replacing is priced at £35 why would you only charge £20? Sell it at £30.
If the job is repairing some tiled in taps where otherwise it would cost £1000 to remove & replace a bath then charge £200 because that's its true value vs the alternative. Doing those, then allows you to do a few at cost price for little old ladies
W
Welder
dont you mean the very empty shaun version
Christmas is over Shaun, time to give the lonely spindles some new company
- Messages
- 10,442
I’m a sucker for OAPs. They kill me sometimes
W
Welder
One of the HS engineers went to a job to repair two taps on a Belfast sink. Normally it's 1-1.5 hrs. He logged in upon arrival and was logged out having replaced TWO cartridges in just over 11 minutes!!!
So, on the basis of £50 for 15 minutes that's nearly as much as I need to entertain my 14 yr old
- Messages
- 12,702
All in one visit.
- Messages
- 5,171
So are these sets in a merchants yet
- Messages
- 12,702
Might be in a few and more soon as I understand it. Why not go the trade show mentioned earlier, see the demo and walk out with the kit, we could meet and you could buy me lunch.
- Messages
- 5,171
Hi Shaun, can you tell me where this blog is please
W
Welder
Not as we speak, but very very soon if you are in either Sheffield or the West Country
- Messages
- 34,370
- Solutions
- 2
- Messages
- 5,171
Thank you
- Messages
- 6,157
Mutley come on! put your glasses on bud click on Dave's link www.tapmedic.co.uk. kop
- Messages
- 10,442
Yay... he is back
Reply to Williams and Co trade... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Has anyone else come across this situation? I keep detecting products of combustion inside the casing of Ideal Logic boilers. I've replaced every...
Had a call to a 82 Old man, he paid these £300 up front for a years cover, and I find out on arrival he's been waiting for 3 weeks, no heating or...
This is a flue from a boiler, just installed by Borthwick. We were worried that this was dangerous so called out BG. They say it is not dangerous...
Has anyone used WOWOW brand faucets? I happened to see this brand of faucets. The price is affordable and the quality seems to be good, but I am...
My living room smells like a sewer but I can't tell where it is coming from. Not sure where to start looking. The saniflo discharge pipe runs...
