What's everyone's favourite end feed?

[Deleted member 96286]

As in title, what's everyones favourite brand of end feed fittings? Mines are Yorkshire Endex as they have never let me down, and are thicker and much better made than the cheapo brands.
On the cheaper fittings, from the diy chains, not only is the copper thinner, but one end of the pipe goes into the fitting further than the slip on the fitting and they generally have tighter bends restricting flow.

So what's your favourite brand?

 

[ShaunCorbs]

Endex but I’m not paying over a quid a fitting will switch to Yorkshire if I’m paying that

 

[townfanjon]

You can always tell the Endex quality , but I will be honest I just buy what’s available when I need them .
Still not become a press-fit wank*r yet .

 

[Harvest Fields]

Yorkshire myself. But every now and again I have to tell Wolseley off for randomly putting their fittings onto my orders when they know exactly what I want.

 

[Best]

Endex also for me, but often just whatever I am sold.
Endex generally is in a class of its own.
Don’t like any other brands that the pipe can slip through.

 

[Aire]

Not really a favourite and I don't have a choice as I use the merchants I'm told but I use Grahams own brand, don't know who make them but the 15mm fittings come in packs of 100 and 22mm in packs of 50 which is handy. They are a case of quantity over quality though and do sometimes struggle getting the pipe into the fittings.

 

[centralheatking]

Flowflex what else would I choose centralheatking

 

[turnpin]

Delcop harder to find still have a box of 15mm elbows in the shed somewhere.....endex ok as well......regards Turnpin

 

[Deleted member 96286]

Delcop harder to find still have a box of 15mm elbows in the shed somewhere...endex ok as well....regards Turnpin

Blast from the past. I found all my old lead working tools last weekend, and in the box was my old faithful moleskin cloth. Bet the youngsters don't know what a moleskin cloth is

 

[Aire]

Bet the youngsters don't know what a moleskin cloth is

An animal rights workers wet dream?

 

[centralheatking]

Blast from the past. I found all my old lead working tools last weekend, and in the box was my old faithful moleskin cloth. Bet the youngsters don't know what a moleskin cloth is

Kitchen towel and loads of flux is almost as good chking

 

[Millsy 82]

I just use whatever the merchant has in stock.

Never really had a problem so never really thought about it.

 

[Deleted member 96286]

Some of the cheap fittings only have a one year warranty. Come on, a copper fitting only guaranteed for a year?!! Endex have a 25 year warranty and can be used for water, oil and gas while many of the cheap fittings can only be used with hot and cold water.

 

[SimonG]

Cheapest. Cheapest. Cheapest. Cheapest. Cheapest.

 

[Millsy 82]

Some of the cheap fittings only have a one year warranty. Come on, a copper fitting only guaranteed for a year?!! Endex have a 25 year warranty and can be used for water, oil and gas while many of the cheap fittings can only be used with hot and cold water.

I honestly have never thought of warranty for endfeed fittings and never thought if they were suitable for gas & water but know they are not allowed on oil due to being soldered.

I think in my 20 years I have never ever gone to a fitting leaking that is down to a manufacturers fault and they are all down to installers fault. That's including the leaks that I have had, I'd like to say it was a manufacturing fault but no was down to me.

 

[Burger]

Blast from the past. I found all my old lead working tools last weekend, and in the box was my old faithful moleskin cloth. Bet the youngsters don't know what a moleskin cloth is

A cloth made from moleskin?

I use whatever is provided, which is currently TP’s own brand, used to be Yorkshire solder ring, then Conex branded solder ring now TP branded, which is goodness knows what.

 

[Aire]

Isn't a moleskin cloth what was used to wipe lead joints? I don't think they're made from actual mole skin though are they?

 

[Deleted member 96286]

Isn't a moleskin cloth what was used to wipe lead joints? I don't think they're made from actual mole skin though are they?

Brilliant. Bang on with your answer.

 

[Aire]

Brilliant. Bang on with your answer.

And I didn't Google it either