Search the forum,

Discuss Vokera Mynute 14se AAV access in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Is anyone familiar with this boiler?

The auto air vent is leaking but is in an extremely awkward place and my plumber nor I can figure out how one gets access to be able to change it. The side panel is welded so not removable and it looks like the only way to access it would be from the rear of the boiler (i.e. remove the boiler to do it!) which seems crazy.

Any ideas would be very much appreciated
 
Happy to do that if it's possible on this model, certainly not something I'm looking to do myself. But is it actually doable? He showed me what he meant and it did look incredibly tight back there
 
Either way I’m sorry to say you are going to need to be gas safe and to be fair their are boilers out there that due to poor design have to come off the wall for certain repairs. You will need to bite the bullet or see if you can get a vokera engineer
 
Status
Not open for further replies.

Reply to Vokera Mynute 14se AAV access in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
192
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock