Discuss Vibration when first opening hot tap after u/v cylinder heating cycle in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
That sounds like it might solve the issue if it's chatter caused by turbulence in the valve from increased pressure from the EV emptying. Assume that asking the engineer to cap off the EV outlet on the combi valve, swap the elbow to the cylinder for a tee and take that to the EV would be suitable?I don't like the ev connected to the combi valve. Prefer to t it in closer to the cold cylinder inlet.
Reply to Vibration when first opening hot tap after u/v cylinder heating cycle in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.