Search the forum,

Vaillant Turbomax Main Heat Exchanger Leaking at Connection

Post new thread

Discuss Vaillant Turbomax Main Heat Exchanger Leaking at Connection in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jdstratton@btin

I have a Vaillant Turbomax 828E which has developed a leak at the Main Heat Exchanger Tube connection point.

Question if anyone can help : Is it normally just the packing ring which has failed or could it be wear / corrosion in the Heat Exchanger Metal ?

Your help is much appreciated .
 
Just to advise it was the packing ring that had deteriorated causing the leak .
 
Status
Not open for further replies.

Reply to Vaillant Turbomax Main Heat Exchanger Leaking at Connection in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
oz-plumber
O
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
147
SnosRap75
SnosRap75
B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
302
Bp89
B
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Lou
Lou
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
293
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
Tilers Forum
Tile News
DIY Talk
Contractor Advice Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock