Discuss Vaillant Ecomax open-vent, overheat stat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

LPC

Can anyone remember if these are dry or wet? Got to change one tomorrow and need to budget time.
 
Not sure, it's about 10 years old. This one:

$_79.JPG
 
Good :)

Bit of an odd one. Went round Saturday, got F 05 error. Stuck a bit of wire between overheat stat contacts, re-attached and started working again. Got a text this morning saying it's gone again. Red button on the stat hadn't popped out. Part coming in tomorrow, will give it a try.
 
Status
Not open for further replies.

Reply to Vaillant Ecomax open-vent, overheat stat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
171
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
140
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
303
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
352

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock