Discuss Unvented hot water pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Stevern87

Hi guys.

I have just noticed a strange white powdery / rust build up on the pump on my unvented system. Is this normal ?

Please see pics.

Thanks

Ste
 

Attachments

  • image.jpg
    image.jpg
    93.3 KB · Views: 31
  • image.jpg
    image.jpg
    91.9 KB · Views: 28
  • image.jpg
    image.jpg
    91 KB · Views: 28
  • image.jpg
    image.jpg
    89.7 KB · Views: 27
where is the iso valve? directly above the pump?
looks like the valve has been weeping for a while,
if it is landing on the pump, over time could be the problem.
 
Hey. Thanks for the reply.

Yes that valve is directly above the pump.

Im covered with British Gas so will get them out on Monday.

Should i just keep my eye on it ? What is all the white stuff ?

Thanks
 
you need to log in or your reply is listed as above, unregistered!

it will have been a slight leak for ages to slowly build up a crusty mould,
not going to be anything to worry about until it is sorted.
 
Status
Not open for further replies.

Reply to Unvented hot water pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm in my new build 2 years and the shower pump has died. I have an air to water unit downstairs is in the utility which I've been told is...
Replies
6
Views
294
Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
183
Afternoon. I have an issue with no water flow from any of the hot taps in the house, I can't seem to find a solution to the issue. System is a...
Replies
11
Views
397
T
Hi We urgently need to get our h/w cylinder replaced because it's leaking. Our current system is oil boiler feeding underfloor downstairs...
Replies
2
Views
423
  • Question
Hello, I am fitting new taps and a shower mixer in my en-suite and was looking to isolate the hot water pipes. I have an unvented indirect...
Replies
2
Views
666
Back
Top