Search the forum,

Unlucky...

Post new thread

Discuss Unlucky... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
It did bug me that things like houses were beyond " Credit card " insurance protection !

One of my Nans ( a long while back ) , ground floor flats , only needed Underpinning before purchase !
 
Last edited:
Status
Not open for further replies.

Reply to Unlucky... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Strange grating noise when mains water is running
Hi all, Got a strange grating noise when the mains water is running in a property I'm looking after. It's a ground floor flat, with a first floor flat above it, and both share the same mains water pipe, and I believe the stopcock behind the washing machine isolates all water to both properties...
Replies
2
Views
506
Jonny
J
T
Noisy Taps since insides replaced
I have quarter turn taps in my downstairs bathroom, the sink taps were getting a bit stiff so I replaced the insides with Flomasta 1/2" BSP quarter turn ceramic tap glands from Screwfix. They work fine but are really noisy unless on full flow or trickle, anything in between sounds like Niagara...
Replies
1
Views
329
Ben-gee
B
L
Mains supply to mixer tap is pushing cold water to hot water pipe
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
588
LordWest
L
surfsup
Outside tap lost pressure since cold snap
My outside tap has had really low pressure after the cold weather a few weeks ago. Its connected from under the kitchen sink, and can be isolated from turning a flat head screw type thing a quarter turn. Any help or advice would be much appreciated!
Replies
5
Views
430
Lou
Lou
A
Vinyl to tile drainage issue
Hi Floor in wet room is changing from vinyl flooring to tiles, floor will rise by about 13mm (tile and adhesive). The current drainage is 110mm for vinyl floor, what can I connect to current system so will be level with tiles. Wet room is on ground floor over concrete. Pls see photos Thanks
Replies
3
Views
274
Gasmk1
Gasmk1
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock