Discuss Underfloor heating pump and manifold choice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
9
Having a load of work done at the moment, part of which is to have wet UFH installed, just looking for any thoughts around the best system to use.

There seems to be lots of choice, looking for 3/4 zone system.

Any thoughts greatly appreciated.
 
Having a load of work done at the moment, part of which is to have wet UFH installed, just looking for any thoughts around the best system to use.

There seems to be lots of choice, looking for 3/4 zone system.

Any thoughts greatly appreciated.
Well, you could do a lot worse than talk to one of the sponsors here & 5% discount. :cool: >>>>>>>>>>>>>>>>
 

Reply to Underfloor heating pump and manifold choice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
405
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
300
PSxxxxxx
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
474
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
563
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
242
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock