Search the forum,

Discuss Trappex Freebie pump rotation tester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Ermi,

You don't need one, just run your hands over the pump and you know which way it's going, like a good doctor, be as useful to you as an ejector seat in a helicopter

I don't need a lot of things but it's free and wanted one! Normally take out screw and look. Sometimes jammed pump gets hot and humms but it's stationary.
 
I don't need a lot of things but it's free and wanted one! Normally take out screw and look. Sometimes jammed pump gets hot and humms but it's stationary.

Usually get bloody hot as well, maybe free electronic thermometers would be nice hey if any going
 
Ermi,

Wilo use put a rotation unit in the end of their commercial 3 phase pumps are they still doing it, get the phase rotation right

[video=youtube;NO8aje1QC38]http://www.youtube.com/watch?v=NO8aje1QC38[/video]
 
Last edited by a moderator:
Arrived...
datygamy.jpg


Many thanks to trappex bspareltd
 
If anybody from the original 20 hasn't received the Trappex pump tester ,please pm me tomorrow and I will send another out next week.
 
The same bloke is selling oil burner drive couplings for 9.99. :) :) :) :)
 
Can I have a free trappex filter instead? You'll have to do something to sway me away from adey? :)
 
They have the UK Franchise for Motan Boilers, but they are giving a 7 year warranty off there own back .Marketing and warranty cover is down to the them not the Romanian manufacturer. They have started to sell a lot of the Motan boilers and they are not cheap.

I thought Motan were German outfit. No?
 
Got a ransom card through the door this morning, looks like mine's waiting to be freed from the clutches of the post office, they are holding him for a ransom of ÂŁ1.19, allegedly due to insufficient postage (large letter , not standard...) I'll go pay his release fee on Monday and put him to work :)
 
I received the same ransom note, wondered what it was for! Better pay up or they may cut it up and deliver it bit by bit.
 
Same here the dirty swines, I thought it may have been from Grundfoss but no.
 
Don't know why ,Ive been to the post office and got a it weighed ,funny that everybody else got it without a ransom !!!!!!!!!!!!
 
Don't know why ,Ive been to the post office and got a it weighed ,funny that everybody else got it without a ransom !!!!!!!!!!!!

Hopefully pick it up on Monday, I'll let you know if it was your parcel or it could possibly be from Grundfoss!
to be honest I wasn't digging earlier just annoyed that it's under by so little and The Royal Mail add a charge of a quid! Robbing gits.
 
Used mine today. One hell of a noise from a heatline c24 a cross between an aeroplane and someone slaughtering cattle. Pump was spinning... turned out noise was from plate hex so gonna dose with x800 and if that dont work get my mate to swap hex and sell em a flush:)
 
No free be or one that cost ÂŁ1.44 yet?


Ermi,

Do you still get post up there ??? :21: if I had one of those freebies I could go up in the Mega-flow cupboard and check my pump rotation ever day, like billy no mates,
be better if they made one that gives you the pump speed, see how much crap is holding the rotor back, that wouldn't be a freebie.
 
Status
Not open for further replies.

Reply to Trappex Freebie pump rotation tester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
77
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
204
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
198
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
124
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
413
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock