Search the forum,

Discuss Trainee/experienced plumber required close to Hampton, Richmond, Twickenham areas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

samsparks

I have a successful plumbing business based in Hampton, Middlesex which I am looking to expand ASAP

I am looking for both a trainee and experienced plumber to join my team.

If you are seeking work please drop me a message through the site telling me briefly what you have done to date, what you are looking for moving forward and where you are based.

Thanks

Sam
 
hi sam
I`am looking to be a plumbers mate got c+g level 2 and cscs card but no experience,i would like to further my plumbing by doing my nvq level 2 and i`am based in london colney hertfordshire.
 
Hi we are looking to relocate, would be interested to know more, is van supplied? tools? daily wage etc, I have 4 years experience, NVQ2 and just completed Gas course. just awaiting certs
 
Hi sam
not to sure if I am a bit far away, but you may want to keep me in mind if you get any work in or near kent, I am based in maidstone in kent.
Qualifications:
served 2 year apprenticeship
NVQ level 2+3 qualified
bpec certification - WRAS, Unvented
cscs gold plumbers card
Completed high pressure jetting course
1 year experience working for insurance company in the field on the tools on my own
currently taking on my own jobs but am wanting to learn more and gain further on the job experience.
i would like to be taken on as a advance apprentice to be put through gas safe, oftec, solar etc or be used when you may need a extra pair of hands. I am keen to learn and a hard worker, I pick up things quickly and can work under my own initiative.

If you feel I may be of use to you please feel free to contact me
Thanks
 
Status
Not open for further replies.

Reply to Trainee/experienced plumber required close to Hampton, Richmond, Twickenham areas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
112
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
186
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
441
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
250
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock