D
diy_monkey
Hello, One & All.
I have just bought a new towel rad for my bathroom, I have removed the old rad no problem, but I have now discovered that the new radiator sits further away from the wall when fitted, than the old rad did. Basically, the pipes do not line up with valves on the new rad.
The pipes point upwards, they dont come out of the floor, but go off to the left and into the wall on the other side of the room.
Is there any way i can bend the pipes without kinking them, so that I can get them to line up with the rad valves? Any ideas would be greatly appreciated.
Thanks in advance.
I have just bought a new towel rad for my bathroom, I have removed the old rad no problem, but I have now discovered that the new radiator sits further away from the wall when fitted, than the old rad did. Basically, the pipes do not line up with valves on the new rad.
The pipes point upwards, they dont come out of the floor, but go off to the left and into the wall on the other side of the room.
Is there any way i can bend the pipes without kinking them, so that I can get them to line up with the rad valves? Any ideas would be greatly appreciated.
Thanks in advance.