A
Andy BYF
The bath taps have 22mm inlets currently the cold water mains 15mm is fixed to the tap by a copper adapter 15mm to 22mm. The hot water is 22mm gravity fed.
Is it ok to add a 15mm T to the cold water pipe and then add 22ml adaptor to the T to connect to a 22m TMV .
I cannot find any TMValves with different intake sizes. The pressure on the hot pipe is very low as the tank is also on the bathroom floor.
Is it ok to add a 15mm T to the cold water pipe and then add 22ml adaptor to the T to connect to a 22m TMV .
I cannot find any TMValves with different intake sizes. The pressure on the hot pipe is very low as the tank is also on the bathroom floor.