Discuss Tiling... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
still the same but thicker

You said about going behind, how would that work if it's screwed in at the front? I'd have to cut out the baton or whatever it's screwed to and then fix the new tap to a new piece of wood and then mount that on to whatever is hanging over...???
 
You said about going behind, how would that work if it's screwed in at the front? I'd have to cut out the baton or whatever it's screwed to and then fix the new tap to a new piece of wood and then mount that on to whatever is hanging over...???

i was on about what townfanjon posted he said plaster board and i mean no difference but the thickness
 
i was on about what townfanjon posted he said plaster board and i mean no difference but the thickness

No, I'm sure you've mentioned before about going behind rather than in front to remove the tap, no?? Maybe I had too many vinos when I read the replies lol
 
No, I'm sure you've mentioned before about going behind rather than in front to remove the tap, no?? Maybe I had too many vinos when I read the replies lol

yes but you said you cant and i thought townfanjon idea was good :D
 
yes but you said you cant and i thought townfanjon idea was good :D

Ahh ok furry muff. My brain is fried and just tucking into my first glass of wine so I'm unlikely to make much sense any more.

Got 9 effing jobs tomorrow and a trip to north London for 4 of them :mad: *sigh*
 
Ahh ok furry muff. My brain is fried and just tucking into my first glass of wine so I'm unlikely to make much sense any more.

Got 9 effing jobs tomorrow and a trip to north London for 4 of them :mad: *sigh*

only 9 do all that before dinner esp if you go to london on your bike (no tole thingy to worrie about and you can cut traffic up)
 
only 9 do all that before dinner esp if you go to london on your bike (no tole thingy to worrie about and you can cut traffic up)

Yeah I was thinking of gettin one of those bikes with the front container like you see those idiots in with their kids in the front ... Might save me a few hours sitting in traffic
 
Yeah I was thinking of gettin one of those bikes with the front container like you see those idiots in with their kids in the front ... Might save me a few hours sitting in traffic

or get a trailer
 
So I've been back to the property and I reckon going in from behind may be an option. There's no way to get the tiles out without damaging something along the way. So in gonna poke my inspection camera through the plasterboard and see what the backside looks like.

I'm guessing it's been fitted onto a stud which I'll have to cut out and replace once I fit the new tap into the replacement piece ... That's the aim anyway.
 
Status
Not open for further replies.

Reply to Tiling... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
303
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
271
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
494
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
238

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock