Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Thermocouple

Post new thread

Discuss Thermocouple in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sdsparks

When replacing a thermocouple is it necessary to replace the interruptor as well?
 
rip.jpg........
 
Status
Not open for further replies.

Reply to Thermocouple in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Gas bottle fire: Pilot light lifts and trips thermocouple
I have a portable gas fire which keeps switching off. The pilot light lifts for 10 seconds, critically above the thermocouple and then the gas...
Replies
0
Views
326
ChaseRocco
C
G
Is my gas burner an FSD problem or a thermocouple problem?
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I blow the flame out the FSD on that burner cuts off...
Replies
2
Views
358
Gary M
G
C
Regs for Boilers in cupboards
I have a 40 year old floor standing Glow Worm 45-60 boiler (open vent )which is in a cupboard in the centre of the house. Its an old workhouse...
Replies
2
Views
340
Caspington
C
F
Wood Burner back boiler with gravity rad system.
Hi All...thx for the help in advance. I have recently installed a wood burner with back boiler heating system. Set up with gravity rad and header...
Replies
3
Views
401
frenchy1966
F
P
Glow worm back boiler
Hi I have a Glow-worm back boiler which is giving me grief (I would have upgraded it by now but its a listed building and there's issues with...
Replies
6
Views
516
Freexicor
F

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock