Search the forum,

Discuss The oncoming budget this week in the Plumbing Jobs | The Job-board area at PlumbersForums.net

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
This wont effect firms that are currently VAT registered but what do you lot think of the possible new VAT threshold of £25000 per year turn over??
Not saying it will happen but thats one figure floating about.
 
This wont effect firms that are currently VAT registered but what do you lot think of the possible new VAT threshold of £25000 per year turn over??
Not saying it will happen but thats one figure floating about.
Pretty sure I read somewhere this week that the idea has been scratched for now and they are looking at a sliding scale model instead.
 
Think it will be good but any works under 10-15 k vat goes to 5% so it doesn't hurt as much should increase the amount of work
 
In response to the original post, I do like the fact that small businesses and small sole traders are currently supported by having the option to pay VAT on materials and not have to charge it on labour, so it would be a bummer to have to start charging VAT. More to the point, I really could do without the extra paperwork involved.

I suppose now that the Conservative Party seems to be losing its claim to be the natural party of business, anything is possible.
 

Reply to The oncoming budget this week in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
237
P
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
176
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
173
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
304
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock