Supporting speedfit pipes under 1st floor floorboards

[Muskopia]

Hi.

What would you recommend for pipe support whilst running 15mm central heating pipes parallel to floor joists?

My idea is to screw wood supports perpendicular to the joists and clip the pipes to the top, or, screw-in wood supports with 22mm holes and pass through the pipe.

When the pipe needs to pass through a joist I'll be using 22m holes or notches and that'll be some support there.

I have four 4-port rail manifolds to go under there two - also a good idea to support with wood screwed between the joists?

Thanks!

David

 

[ShaunCorbs]

Britclips® Rapid Sliding Wall Bracket | Pipe Clamps | Fasteners and Fixings

Extendable bracket for mounting electrical boxes, they are for fixing any cable containment behind a plasterboard / stud wall, and can be fixed to metal or timber studs.

directchannel.uk.com

 

[Scott_D]

Timber as you describe
Wall raven bracket
Clip to the side of the joist

 

[Donkey Table]

Britclips® Rapid Sliding Wall Bracket | Pipe Clamps | Fasteners and Fixings

Extendable bracket for mounting electrical boxes, they are for fixing any cable containment behind a plasterboard / stud wall, and can be fixed to metal or timber studs.

directchannel.uk.com

Shaun your a god send, Ive been looking for these.

 

[Lou]

(Just bumping a few older threads, they will drop off what is new soon)

Check Out Plumbing News!