Discuss subbing prices anyone? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

TFGplumbing

Plumbers Arms member
Plumber
Gas Engineer
Messages
998
What's the going rate for a bbu to combi? I know it's going to vary a bit just a rough idea would be handy.
It would be for a local housing association.
 
With vertical flue? Condense pump? Long gas run? Give me a rough idea and I'll work it out on my price list.
 
With vertical flue? Condense pump? Long gas run? Give me a rough idea and I'll work it out on my price list.

Boiler in airing cupboard, through the roof kit, new gas run say 4.5m, condensate into ajacent bathroom, prv run same direction.
 
2 days. We also get an additional £52 for a flush on every install. Not a powerflush.
 
How much extra for new lock shields & trvs on 6 rads?

am I too assume the prices you quoted don't include fittings, pipe & sundries?
 
How much extra for new lock shields & trvs on 6 rads?

am I too assume the prices you quoted don't include fittings, pipe & sundries?

No I don't pay for anything! I'd get a sack of fittings and 4 lengths of each on a bbu to combi unless the gas run is excessive. Rad valves are an additional £31 for up to 7 pairs. Where they get their numbers from is anyone's guess!
 
Does this include a roofer for the flue or do you do it yourself

Scaffold up on every vertical install. I'm up there like a rat up a drainpipe! Builder can do the roof bit but it costs 12 quid off of your install. That's a box of **** and kingsize mars bar!!
 
Scaffold up on every vertical install. I'm up there like a rat up a drainpipe! Builder can do the roof bit but it costs 12 quid off of your install. That's a box of **** and kingsize mars bar!!


No scaffold round these parts, up the hook over like a squirrel apparently
 
Is it a one off job or what? I prefer the full heating jobs. Better dosh and more tube!:lipsrsealed2:
 
Last one i done was £750 for a full install

That included all trunking , painting any visible pipes and if a cylinder came out the cupboard had to be painted.
 
Status
Not open for further replies.

Reply to subbing prices anyone? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Gents, It finally happened. A developer has asked for a price for the entire house to be fitted in copper with press fitting...... Does anyone...
Replies
4
Views
112
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
309
Hi what is a rough guide cost for labour only in a typical 4 bed house new build in england Air source heat pump with Unvented cylinder...
Replies
3
Views
641
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
650
Hi, I am involved in a local charity which is fundraising to restore a local pub into a community hub (and also a pub). The pub which is The Hop...
Replies
0
Views
378
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock