Discuss speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Technically plasticiser will leach out of system where water is always changing ,hence more brittle (less spring back to keep things sealed)

Sealed circuit (ie-Boiler) , plasticiser cannot escape gets re-circulated

( PURE Theory no experiece with plastic plumbing--)

Loss of plasticiser and enbrittlement == fact

Trade offs a) How hot
b) How much water thru system
c) How many years of life
d) How many hours a day pump runs
e) Price of install

Life whole system needs to last -vs- water thru system for effect to happen

Copper rules !
Think your theory is wrong, seen plastic that has been used for dhw that is 25 years old and is still ok, not brittle at all
 
dhw that is 25 years old and is still ok, not brittle at all

But did that water keep getting mixed/re-circulated with 210 litres of fresh water ,ready to soak up more plasticiser ?

( only needs to happen to softer seals to be a problem )
 
Last edited:
may not have seen effects of plasticiser in pipes ,but seen it leach out of cables and damage painted surfaces -within a year-
Insulation on cable is PVC and should not be painted with gloss and is not the same material as plastic pipe :)
 
Has water running through it every time tap is turned....you been on the pop ? :)

The total no. of litres flow at final outlet ,must be nothing compared with continuous replenish hot with hot that happens within pumped secondary return , that stays hot so boosts leaching effect

( any YES Cider )
 
personally if the manufacturers say dont use it, I wouldnt, as come the day it fails, you are in the pooh as the installer who has to defend your actions.
 
The total no. of litres flow at final outlet ,must be nothing compared with continuous replenish hot with hot that happens within pumped secondary return , that stays hot so boosts leaching effect

( any YES Cider )
If it leeched into water it would be banned
 
Status
Not open for further replies.

Reply to speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
I'm a plumbing novice so first of all I apologise if I'm not explaining this situation correctly. I've recently renovated a house for my family to...
Replies
14
Views
2K
    • Like
As recommended by the welcome email, hello all, my name is James Pirie and I am not a plumber but a keen DIY enthusiast mostly due to the severe...
Replies
4
Views
451
Hi Everyone, For those who like a long read but I could rally do with some advice. Might be a bit long this. For background. A...
Replies
3
Views
286
just put a new pop up waste into my basin to find the trap does not fit correctly.. the trap fits just inside the waste thread opening and butts...
Replies
7
Views
875
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock