Discuss speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Nursing homes etc. Or is that exempt as it's not oxygenated in the central heating.
 
Higher pressure in invented ? CH water isolated from mains ? If secondary return leaks its constant leak ?
 
Nursing homes etc. Or is that exempt as it's not oxygenated in the central heating.
I work in loads Simon, and yes they are on a lot, but not 24 hours everyday, maybe the fresh water has an effect too, all I know is what I have seen, not good....
 
The one round the corner from me do. It's continuous. It's like a bloody oven in there. 9 rooms and 4 flats.
 
Load of nonsense I've used hep on returns for years with no problems its a lower temp than central heating and the pressure is 3 bar max, another bit of scaremongering about plastic yet again!
 
Load of nonsense I've used hep on returns for years with no problems its a lower temp than central heating and the pressure is 3 bar max, another bit of scaremongering about plastic yet again!

Well... No problems until one occurs! Not suggesting that there will be a problem, of course, but if one does, no manufacturer will honour the warranty, and your insurance will be void. It's like any regulation or precaution - it's not there to cover the 99.999% of situations where nothing goes wrong, but the 0.001% of the time when something does...

You make your choice and take the consequences - you're a braver man than me!
 
Load of nonsense I've used hep on returns for years with no problems its a lower temp than central heating and the pressure is 3 bar max, another bit of scaremongering about plastic yet again!

Aww maybe I am wrong then, and the manufactures are too, hence why they dont endorse it for this application, must have been the ammonia essence that caused multiple pipe failures......the returns do have to be on 24 hrs a day for this to occur.

I don't hate plastic pipes, indeed it has it merits in some circumstances, but copper all day long for Vern!
 
Well... No problems until one occurs! Not suggesting that there will be a problem, of course, but if one does, no manufacturer will honour the warranty, and your insurance will be void. It's like any regulation or precaution - it's not there to cover the 99.999% of situations where nothing goes wrong, but the 0.001% of the time when something does...

You make your choice and take the consequences - you're a braver man than me!

100% agree...very rare but seen it happen!
 
New posts
Status
Not open for further replies.

Reply to speed fit on secondary return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
339
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
289
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
269
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
257

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock