- Messages
- 10,034
Looks like, as I warned, pipe stat is on wrong pipe!
It should NOT be fitted onto the primary flow as that pipe will become extremely hot rapidly and maintain a high temperature.
It needs to be after the heat is lost to the cylinder - on the return at bottom of cylinder.
Needs also to be set to a temperature that switches pump on long before the solid fuel pipes boil.
Best you get a heating engineer that is experienced in solid fuel systems to check everything out.
It should NOT be fitted onto the primary flow as that pipe will become extremely hot rapidly and maintain a high temperature.
It needs to be after the heat is lost to the cylinder - on the return at bottom of cylinder.
Needs also to be set to a temperature that switches pump on long before the solid fuel pipes boil.
Best you get a heating engineer that is experienced in solid fuel systems to check everything out.
