Sok it to me ********s!!

[Whyme]

and the mdf was fire retardant..

 

[tamz]

View attachment 17092 I have upped this before. tis a solid fuel/gas boiler/thermal store combo. the laddomat valve and quencher are next to the wood burner. btw the flue is running up behind a stud frame and accessible.

What a dream to have the space to do our job the way it should be, Nice work :smile:

 

[tamz]

and the mdf was fire retardant..

You can hang a Vaillant on anything subject to building regs

 

[tamz]

These have been put up before. RIMG0008 by Mike Jackson1, on Flickr RIMG0001 by Mike Jackson1, on Flickr RIMG0003 by Mike Jackson1, on Flickr

IO hate to pull you Mike but in the first 2 pics it wouldn't be in my house. Lift a couple of boards and drop your pipe verticle and stick the eyesore filter somewhere else.

 

[tamz]

1st pic above. I can't edit it.

 

[Mike Jackson]

Couldn't get boards up upstairs without dismantling a bedroom full of built in furniture. This was a bare bones budget install hence the main HE boiler. I'd normally fit the filter in the airing cupboard but no room to move in there.

 

[Ermintrude]

Like the labels / valve tags. Nice job assume u lagged it afterwards

 

[stevetheplumber]

dont use a torpedo level if you want good straight pipework always level the clips then add pipe easist way under a boiler is strike a center line and measure of each side ,youll most times already have a centerline from hanging the jig just take it down to the level of the lowest clipthen strike two lines level where the clips are going and measure of same spacings as the boiler pipe centers

 

[AlexGas]

Not gonna work with gas capped? Bit of a basic fault? But a spirotec? Crossovers look tidy. Would have run hot round under flow parallel to gas and tied it in higher up and fitted a doc .

This is a redundant gas supply. A new gas meter is outside now. The customer wanted the spirotech, it wasn’t me.

 

[AlexGas]

bends not elbows and a shock arrestor good call. what boiler was it needing an external bypass?

Ideal Logic+

 

[TBServices]

Logic plus has internal bypass through plate

 

[Ermintrude]

Ideal still spec 10. % heat leak over bypass?

 

[TBServices]

True. But they only ask for this in the form of a radiator, not an ABV.