Search the forum,

Discuss small district heating system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

washout

Hi, what qualifications do I need to install and sign off a small biomass/solar thermal district heating system for the RHI. boiler will be in excess of 75KW most likely log gasification. cheers in advance alex
 
It's over 50kw so you need to go through building control I think mate
 
MCS is appliance only based. If you can install the pipe work & the HIUs etc, then the appliance supplier will commission only the boiler & sign it off.
MCS has always been a waste of money, appliance & solar system manufactures will always find a way around it.
 
My understand of what iv been told by my boss is anything that comes into commercial biomass you don't actually need any tickets and that its a bit off free for all. And seeing you going to be 75kw I'm pretty sure the domestic to commercial is over 50kw so you don't actually need any qualification but saying that you should really at least hold domestic hetas so you have a understand (not saying you don't)
 
Yes I was always told the same thing by a company I do similar work for. But I was told that MCS doesn't come into it over 45KW

Isn't covered by Hetas either.

It's quite strange really
 
Status
Not open for further replies.

Reply to small district heating system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
251
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
182
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
531
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
336
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
258
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock