Discuss Shower pump problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rogerrog

Hello all, I have installed a showerforce 3 bar pump in my bathroom due to lack of water pressure. The pump works really well and pumps out great. The only thing is that when the pump is not in use (plugged in) it switches on and off constantly unless I switch it off. This is a real pain, as obviously cannot keep on switching it on and off before/after use. As far as I am aware it doesn't have any non return valve's on it. I have not installed any. I am in doubt as some ppl say it could be the flow switch or the installation of a non return valve! Pls could someone help!

Thanks guys!
Roger
 
Status
Not open for further replies.

Reply to Shower pump problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
146
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
274
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
143
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
355
S
I have a brand new, unboxed shower/wet room screen from KRION purchased from Porcelanosa UK. It is the Attica 1 model, as shown in the attached...
Replies
0
Views
122
Sebastian T
S
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock