Search the forum,

Discuss Shower identification. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

gingalig

Gas Engineer
Messages
217
Hi, Bit of a long shot, but can anyone identify this shower, I've advised replacement but they have two and would like the other one revamped. Unfortunately they don't have the paperwork and there is no identification on the unit.

20190125_182709.jpg
 
As Matchless advises, get some pics over to showerdoctor, they need 3 pics to increase chances of ID, one like the pic you posted above, one as above but with the cover/knobs taken off & one of the cartridge (assuming that's what you need to replace). The form to fill in and attach pics on is here:

Identify my Shower
 

Reply to Shower identification. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
140
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
218
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
314
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
285
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock