You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
identification
Identification is a psychological process whereby the individual assimilates an aspect, property, or attribute of the other and is transformed wholly or partially by the model that other provides. It is by means of a series of identifications that the personality is constituted and specified. The roots of the concept can be found in Freud's writings. The three most prominent concepts of identification as described by Freud are: primary identification, narcissistic (secondary) identification and partial (secondary) identification.While "in the psychoanalytic literature there is agreement that the core meaning of identification is simple – to be like or to become like another", it has also been adjudged '"the most perplexing clinical/theoretical area" in psychoanalysis'.
Hi - I've got a quarter-turn cartridge that I'm trying to identify please - 35mm x 58mm. It's about 25 years old and uses square profile o rings.... can't find anything online that matches and unfortunately don't have original manufacturer's details.
Many thanks.
Morning,
Doing some work on our UFH manifiolds and was wondering if anyone would be kind enough to let me know what the T-fittings in the picture are, thought they might be some kind of tektite fittings?
Many thanks.
Hi,
I was just wondering if anyone knows the brand of this push fit? I've tried several different searches on google but I cant find anything similar. And also is the plastic pipe polybutylene or else?
I was interested to see how the copper pipe could be release if it needed to be in the...
Can anyone help identify the brand of this fitting? I’m trying to identify what inserts I’ll need to connect in to existing pipe.
https://community.NoLinkingToThis/attachments/124e6307-a2de-4f33-9c5e-973331467876-jpeg.78235/
All,
A quick question if any of you can help? I have a shower mixer valve (not thermostatic) that I believe I causing my shower to drip. I’m happy to replace it but I don’t know what it’s called or if I need to replace to whole shower? Previous mixer valves have been easier to replace but not...
Hi all,
Can anybody identify the manufacturer and model of my bath mixer tap with shower attachment.
The tap head pulls off and there is no grub screw - interference fit I believe.
My best bet is that it is about 15 years old. It's a quarter turn and leaking on the cold side so I need to source...
Bath mixer tap manufacturer identification
I have a drip on the cold side of my quarter turn bath mixer. I cant isolate the feed as the isolation valves were installed face down
against the floor!
If some kind soul could identify the make/manufacturer I could source a new cartridge. My guess is...
Afternoon all, just try in identify thus valve, circa early 2000's. Bought a replacement from Toolstation to do a quick change. I wanted to keep the nut and olive on the 10mm pipe and replace the leaking body of the valve. The threads were different!!
Hello everyone,
I have recently had a leak under the sink and a short investigation I found this part on the photo cracked. This is a part of the cold water flow and goes straight to the tap.
For self-training purposes (I have currently zero experience in plumbing) I thought that maybe I could...
Is there anyone out there recognise the manufacturer of the shower mixer valve , there is no markings on the leaver or brass work. It has started to leak around the barrel. Thanks
I need to reposition this Sensus water meter but the 3/4 inch copper pipe on both the inlet and outlet is too short. Rather than heating up each fitting to remove the stubs, I would prefer to replace each fitting with new in the new arrangement. My problem is that I don't know how to identify...
Hello everyone, the piece shown below broke when removing it from the T-piece from one of my radiators. The outside screw piece broke in two. It seemed to be closing the steam trap. I need to replace it but don't know what it is called and my local (South London) plumbing supply store didn't...
Hi
Newbie here
Can someone please identify the part in the picture
This is connected to the discharge pipe on our hot water cyclinder
There is a small leak form the black part
Hi,
I'm struggling for months to get help on identifying a shower mixer. Bristan just say they are busy for months. Can anyone help me identify the type of mixer? We think it is an 06734b. We are not sure. If we try and chance it our plumber says we will be without hot and cold water and would...
Hi guys,
Can any one help with an old Riello pump and giving me an idea of a current p/n.
The p/n on the old pump i have is 6070 9623, but this isn't recognized by any current suppliers website.
dose any one know what current pump it would cross refer to?
Many thanks
Mark.
Helo, I'm needing help to identify a bath tap that needs a new cartridge. Its only identifying feature is HB on the tap body, in capitals. It is part of a three-part system, tap, spout and hand shower hose, that was installed in 2003. It is not Heritage Bathrooms. Any help please?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.