Discuss Rf stat for elderly customer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
Guys , got a boiler to swap for a very old lady and need the EASIEST rf stat ( not programable ) so it can live at the side of her bed . What would you fit ? Thanks in advance. Cheers
 
Best is old stat with dial as you probably know already !
I think Honeywell did a fairly simple one that was just a stat but it is a while ago.
Can it not be wired ?
 
Eco stat !
I put one in for an 80+ year old and he likes it.
It has a night set back which he uses but it doesn't need to be used
.
 
What about this?

You dont need to use the app just crack on with the room stat.

 
Drayton rf stat (the twist dial one)
 
Boss therm BRT RF (Siemens RDH10RF) very simple.

Only has rotary dial and large easy see digital display.

Point and go. No setting up or binding.

Inexpensive.
 
Boss therm BRT RF (Siemens RDH10RF) very simple.

Only has rotary dial and large easy see digital display.

Point and go. No setting up or binding.

Inexpensive.
These are really really easy. But crap. I stopped fitting them as I had about 4 where it would take about 20 minutes for the heating to stay in.
I would fit a Honeywell and leave it on manual or a Drayton but not keen on them either
 
Thanks to all so far , I should have said it must be a dial rather than up and down buttons , but cheers some useful stuff .
 
Status
Not open for further replies.

Reply to Rf stat for elderly customer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
252
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
356
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
321
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
290
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
224
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock