Hi All, I replaced my existing washbasin bowl set with new Shaw and Mason forward bowl set spindles and chrome handles. The water pressure has reduced tremendously. when I opened the tap and tried running water directly it comes with full pressure. Also, if I open the spindle from the basin it also shows high water pressure. Only it is flowing slowly from the tap. Could be possible the tap might be loosely connected to the centre point?
Discuss Reduced Water pressure on forward bowl set in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Reply to Reduced Water pressure on forward bowl set in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
