Discuss Rad valve with drain in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 1,824
The ones I've come across had a small rubber washer similar to a standard soldered doc
I hate these drain offs with a passion
I hate these drain offs with a passion
- Status
Reply to Rad valve with drain in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
