You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
rad valve
Spod are an Australian indie, electro band, often styled as SPOD, which formed in 1995. It is also the pseudonym of the band's mainstay member, Brent Griffin, whether he is performing solo or with other members. They have released two albums, Taste the Radness (2003) and Superfrenz (September 2008).
I'm in Canada, where the standard is NPT. I just put in a heat pump and shut off the hand valves but I want the rads in the room to warm up if the heat pump can't keep up. NPT thermostatic rad valves are available but are hellish expensive. The sizes I have are 3/4" and 1". The system used to be...
I will soon be fitting a towel rail and have been looking at what manual corner valves are available.
I note that a good proportion of manual valves seem to be the opposite orientation to what I would expect i.e. the adjustable valve, if fitted on the left hand side, would stick out from the...
Hi all,
First post and DIY'er, please be kind!
Just moved into a property which needs some work. Have a plasterer coming soon and need to get this rad off. Any ideas how on earth this valve works?! I've never seen one like it before. It's not moving with either a flat screwdriver or spanners...
Last year we had a new pressurised system put in and left our existing rads in place.
Downstairs are all fairly modern rads with TRVs etc however upstairs are still the original rads from 1980 with 8mm microbore and twin valves, no TRVs.
I'm looking for some advice really on where or not we...
Hi.
Having problems with these rad valves. The chrome type fitted to acova column radiators in a renovation project. Ex-plumber here but been out the game for 15 years.
Basically, they ‘work’ when heating starts from cold but then trv shuts off and never cuts back in. So for example - heating...
Evening All. Can any1 provide a link for a thermostatic radiator valve and head which is suitable for a 1 pipe heating system. I know danfoss but was unsure of the model number.
thanks in advance
Hi all.
I'm removing the rad in the picture for decorating and want to blank off the connection from the thermostat/valve to the rad (will do both ends obviously). The thermostat/valve has 1/2 bsp stamped on it but pretty sure the connection to the rad is not 1/2 bsp, I have a couple of 1/2 bsp...
I currently have 3 old radiators that refuse to heat up. Last year a plumber kindly removed a cap and released the pin but I have no idea how he took the cap off and I don't remember whether or not the system was bled at the time. Does anyone recognise this type of cap. If so, any advice would...
Rachopeth
Thread
attach
help
old
please
problem
radvalve
removal
valve
year
Hi All
Im a good DIYer not a plumber. Im workng on a closed heating system. Im replacing all valves on Rads. New Pegler lockshield valves and Drayton TRV4. To scope it out tonght tonight I started on the downstairs hall rad to see how this would work. I closed off both existing rad valves...
Iveagh
Thread
leaking
likely
lockshield
pressure
radvalve
system
valvevalves
Does the compression nut on a rad valve need to be all the way on to the rad tail? Or can it just be on just over the olives depth? Have one that the pipes are exiting the wall and are 5/10mm out
I've got a rad that was leaking a decent amount of water, tried nipping things up but it didn't help. Yesterday I thought I'd quickly whip the nut off and repack the gland spindle and add a bit of PTFE when reattaching the nut.
I undid the top nut but there' s a black plastic/rubber inner that's...
anybody has some experience with this sort of valve is that useful ?
https://www.google.co.uk/search?q=isorad+wrench&biw=1280&bih=699&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIrfrS5ovyyAIVy9UeCh276wkM#imgrc=reFyDtlJdMRzYM%3A
Hi lads, I know this is a long shot but do you know where ye might pick up some Pegler rad valve on/off caps. Have tried suppliers here in Dublin but with no luck.
I know normal type are fine. But this type where the bit slides up and down:
Radiator Compression Valve Tail 15mm Pack of 2 | Manual Valves | NoLinkingToThis
I installed a 12kw electric combi boiler the other day.
Double checked what was the the flow and return from the manual of the old boiler before making connections to the new boiler.
Finished install, filled her up and all went well.
Was called back today as one rad, when you turn off the...
Hi all
i have been given the job to replace a radiator. The rad is now hung on new brackets etc. but I'm having a bit of trouble getting the Correct tails. The excising tails were 3/4" bsp with a 1"union nut which then screws on the valve. the new tap is 1/2" bsp. The valves are 22mm inlet and...
I want to replace a radiator valve in my house and want to replace like for like. The valve has Center Brand or Brand Center wrote in a circle on the top. I dont seem to be able to source this make of valve.
Does anyone know of this make?
thanks.
Hi all - this is my first post so please go easy.
I'm looking at having a TRV fitted to two radiators in a room in my house. I'm familiar with TRVs which operate a rad valve with a pin which is pushed and pulled by the TRV to open and close the valve. But my radiators have a valve of the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.