Search the forum,

programmer

Post new thread

Discuss programmer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

stevetheplumber

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,619
my brother has just phoned me complaining his time clock isnt working just worked out when i fitted it its a landys and gear mini minder any guesses how old it is?
 
10 years ?
 
Longer than that stefa brand came out early 2000s
 
Miniminder was out late 70's to 90's. Best clock ever made for old people in its different guises.
Landys and Gyr made it a few manu's too.
Replace it with anything it is on the now industry std backplate (which was originally made by them too) and will be a straight plug in swap.
 
Just noticed it was Steve who posted so no point in teaching how to suck eggs lol
 
1981 some honeywells dont last a year now and as tamz so nicely pointed out probably the best programmer ever
 
Another blast from the past. Came across this one yesterday. Probably the best wiring centre ever made too (its a Randall)
IMAG1021.jpg
 
Status
Not open for further replies.

Reply to programmer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
218
Timmy D
T
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
545
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
Tiling Forum
Plumbing Advice
Tile Blog
Tile Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock