Discuss Pressure gauge for 22mm pipe in the USA area at PlumbersForums.net

Messages
30
Hello,

Can someone be kind to tell me what parts do I require (and where from) if I want to fit a pressure gauge on a 22mm feed, I guess I would need a tee to house the gauge, cant seem to find anything online.

Many thanks
 

Attachments

  • pressure-gauge.png
    pressure-gauge.png
    55.8 KB · Views: 11
22-1/2 tee
1/2 - either 1/4 or 1/8 depending on the guage fitting
 

Reply to Pressure gauge for 22mm pipe in the USA area at PlumbersForums.net

Similar plumbing topics

I have a CH boiler installation with a nice simple vertical condensate drain, down and out through the wall to a pipe outside. All is as it...
Replies
8
Views
501
Hi, Non-professional / knowledgeable person here. I'm a Brit in Romania who volunteers for a charity building an old peoples home for needy old...
Replies
3
Views
415
Hello, bit of a noob question but would someone be able to help me to understand the pipes coming off our boiler. It's a Grant oil combi boiler...
Replies
9
Views
714
Hello all, I want to increase the system pressure to 1.5 bar. Following the user manual (found one online) and some YT videos the filling link...
Replies
2
Views
436
Ive extended my house and need to run the plumbing, I will tee off from the main house which is 15mm, I'm wondering if it's worth increasing it to...
Replies
7
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock