Search the forum,

Discuss potterton programmer ep1 not working since lighting circuit blew in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mooey

hi all had a short on my lighting circuit at home and now my programmer is not working or showing any display any ideas.Don t understand why as it should not coming off the lighting circuit.
 
You'll need a competent person to check there's power to it, if there is your programmers fried.
 
I presume you mean a volt stick. Those arnt a overly accurate way of checking power. Borrow a multimeter from
someone.
 
I presume you mean a volt stick. Those arnt a overly accurate way of checking power. Borrow a multimeter from
someone.


I ve got a sparks coming round to check It out boughtva new programmer but before fitting it I will have it checkef out
 
Status
Not open for further replies.

Reply to potterton programmer ep1 not working since lighting circuit blew in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
264
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
517
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock