Search the forum,

plumbers mate kent

Post new thread

Discuss plumbers mate kent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

supper plumb

Any one looking for a hand on jobs?
im based in Kent and willing to travel I may be a trainee but I have past plumbing experience.
i have other skills to help you out
and I'd like to think I'd be a asset to any one willing to take there time to show/train me the wright way of things.
im 24 cscs own tools and I'm just trying to find the right path in the plumbing world.
so I'm a grown up not a school leaver or wet behind the ears.
with my other skills I'm willing to offer for free I think I'd make you a good work buddy.

Soo who is on site or starting an install then????


Before any one starts moaning and whining its not a WIND UP or HOAX
 
Status
Not open for further replies.

Reply to plumbers mate kent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
115
Lou
Lou
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
242
Chuck
C
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
90
DIwhYdidIstartThis
D
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
194
mutley racers
M
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock