Search the forum,

Discuss Plumber Needed in Harrow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

roly16

Hello,
I have what I have been told is a single pipe system; most of the radiators are the skirting board height type and quite old. The combi boiler is about seven years old and working and the pump is working, but most of the radiators aren't getting cold; the one normal height rad is getting warm. The one that works off the hot water system is working; it's a low height one. I can't find a motorised valve anywhere to test so suspect that a flush may be needed but that's a guess. I'm selling the house so don't want to replace the system. I would like a visit from somebody familiar with these systems. Can anybody help please?
Geoff 07973 529183.

Just realised that I may have misunderstood the meaning of the title of this forum and thus posted it in the wrong place; but can anyone help anyway?
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Plumber Needed in Harrow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
133
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
127
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
185
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock