Discuss Plate heat exchanger in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

buckley plumb

Hi quoting for a reply old church building. Can anyone post a link of a good heat exchanger as I want to keep new boiler circuit separate
 
we use these

[DLMURL="http://www.sondexphe.co.uk/en-GB/Home-2.aspx"]Sondex - International Supplier of Plate Heat Exchangers[/DLMURL]
 
Last edited by a moderator:
and we use these but get them through Albion (who make cylinders)
Products - SWEP

what sort of power are you looking at Kw?
 
Last edited:
Status
Not open for further replies.

Reply to Plate heat exchanger in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a Baxi Duo Tech 28 HE. According to an online search with the serial number and GC number, I should have a 20-plate heat exchanger. So, I...
Replies
1
Views
546
E
  • Question
We just had a service done on our Ideal ICOS boiler and were told that the 2 screws on the back of the heat exchanger have snapped off. It was...
Replies
5
Views
513
I have a thermal store heated by a boiler with its own thermostat. I also have a stove with a back boiler. The stove heats water in a separate...
Replies
2
Views
474
Hi, Boiler is losing pressure, from 1.5 bar to 0 bar in about 4 hours. Have checked all rads and seem to be fine, no water out external prv...
Replies
5
Views
655
Hi everyone, I have taken out the heat exchanger because a tiny leak was found around the red gasket at the top of the heat exchanger of a...
Replies
1
Views
474
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock