pilot light wont stay on, baxi bermuda

[peteeyres]

I've got a baxi bermuda back boiler, the pilot light has gone out and when trying to get it going by igniter button and 'grey push button ', I hold the grey button in for 15 seconds and longer on some try, then slowly release the button. The light is on till the very last point of letting go of this grey button but then it like the gas stops flowing to it, I can here the gas flow. Any ideas or help welcome we've got no hot water or heating and it's getting tricky with 2 kids and the wife now!

 

[mountainman]

You need to call a gas safe engineer to sort out your problem.

 

[Dotty]

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.


Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. http://www.ukplumbersforums.co.uk/im...-gas-engineer/


If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.


Providing gas-related advice to anybody who should not be touching gas and cannot prove their competetence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given



Thank you.


UKPF TA's, Mods and Admin teams.


[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]


http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html