Discuss Pan outlet pain. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jackplumb

My pan outlet is 70mm from the wall but my existing soil pipe which is fixed in the floor is 200mm from the wall, what do I do?
Go for a beer sounds a good idea to me.
 
kango out floor and move the waste or create a faulse wall/boxing behind the toilet and use a question mark pan connector to get the boxing size as small as possible.
 
Status
Not open for further replies.

Reply to Pan outlet pain. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
312
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
187
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
332
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down...
Replies
2
Views
179
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock