Search the forum,

Discuss Outdoor tap required fitting, Larbert, Falkirk in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

nm10721

Hi,

I'm looking to get an outdoor tap fitted. i'm in Kinnaird Village, Larbert

regards

Neil
 
Bit out of my area but.......I will pop up if you pay my flights and hourly rates:wink:
 
Hello nm10721, welcome to UKPF. Where is Kinnaird Village, Larbert? Is it anywhere near Croydon? I'm interested
 
Hello and welcome, smt plumbing is in your neck of the woods, drop him a private message
 
It's just one guy that doesn't like doing outside taps that's all.

No, I remember one from months ago, only wanted to pay about ÂŁ25 IIRC
Oh and welcome nm10721, no offence intended :D
 
Status
Not open for further replies.

Reply to Outdoor tap required fitting, Larbert, Falkirk in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
279
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
241
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
220
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
151
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
251
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock