Discuss Oil transfer pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

P J F PLUMBING

Hi guys what pumps have you got need to replace a tank next week but. It's just been filled price and make pls cheers Pete
 
I use a patay dd120, hand a matic pump, can do around 600l in 10mins

My top tip would be get longer hoses than you think you need and also a suction lance to get right into the bottom corners easily.
 
HWOS do one for about 300. I just get a lad I know. He brings his pump and a spare tank, sorted.
 
I have a 240volt electric pump that pumps 60 litres a minute.
Think it is a Piusi Panther pump.
It came with a nice strong outlet hose & lever operated nozzle (similar to ones at petrol pumps) & all it needed was several metres of suction hose.
Whole lot inc extra hose cost £170 Inc vat.
Brilliant pump & used it a few times. I tie the suction hose to a baton of wood, keeping the end up a couple inch so to avoid sucking dirt & water. All it needs is it's gauze filter checked & cleaned often.
 
Last edited:
My mistake, - pump I have is spelt "Piusi" Panther & there is a 56 or a 72 model. I see them from £129 + vat delivered free UK mainland.


Have now edited original post.
I am getting my pussys mixed up! :smile:
 
Last edited:
Status
Not open for further replies.

Reply to Oil transfer pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
352
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
461
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
243
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
327
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
285
PSxxxxxx
P
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock