Search the forum,

Oil rigs

Post new thread

Discuss Oil rigs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

Koogatubac

Anyone know how to get onto the oil rigs? Any decent websites? Ive been in contact with some who want a deposit which ive heard is a hoax!
 
Not an easy thing to get into these days without knowing someone plus you will need to do the survival training before you are even considered.
30 years ago you just hung about the pubs in Dyce and got talking to the right guy and you were in.
The money is not as good as it once was but it is still ok.

The lassies (ex)boyfriend wasted a lot of money on courses trying to get in and still hasn't.

Have a read through some of this
[DLMURL="http://www.falck.com/nutec_uk/courses/Pages/Offshoretrainingcourses.aspx"]Offshore Training - Health, Safety and Offshore Survival Training Courses at Falck Nutec and Falck Onsite[/DLMURL]

Cleddau.Com - Oil Rig Jobs / How To Get A Job On An Offshore Oil Rig / Work On Offshore Oil Rigs / Oil Rig Jobs
 
Last edited by a moderator:
At my local village (Penshurst) they still do. Old Skool!

Long may it last!
 
Status
Not open for further replies.

Reply to Oil rigs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
dreikher
dreikher
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
oz-plumber
O
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
oz-plumber
O
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
264
ShaunCorbs
ShaunCorbs
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
242
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock