Search the forum,

Discuss Oil pressure reducing valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Inverness

Plumbers Arms member
Plumber
Gas Engineer
Messages
710
hi guys, I'm planning to locate a new oil tank but the problem is the height will most likely to be greater than 4 meters from oil pump. I know you can use a oil pressure reducing valve have anyone used this before?.
 
Used on in a cellar a few years ago.
Can’t remember the make. But had no problems.
 
What can happen if you don't install a prv on a oil line if it's above 4 meters from burner.
 
Status
Not open for further replies.

Reply to Oil pressure reducing valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
307
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
165
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
416
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
227
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
296
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock