Search the forum,

Discuss NVQ Level 2...will work for free!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
38
Hi I'm 29 years old i live in Wandsworth currently studying level 1 plumbing at the College of North West London,To go on to level 2 in September i need to be working 1 day a week with a plumber do you have any positions available where I could work the 1 day with you for free of course I could start as soon as possible...I can send you a cv and references and a letter from my college

Thank you
Dean Savva*
Sent from my iPhone
 
Hey Check this out!!!

Apprentice needed £40/Day
I am looking for a apprentice to work in the Gas Industry. He/She would not need to have any experience, but need to have a technical mind. Do not need to have a transport, but must have a Valid UK drivers Licence. The job would involve driving, repairing and installation of gas appliances (Boilers, Cooker, Oven, Hobs,) and also plumbing work. Cheap accommodation could be provided for £260 a month. The Job in New Malden, Surrey.Nishi on 07949 482048
 
Status
Not open for further replies.

Reply to NVQ Level 2...will work for free!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
365
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
254
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
255
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
283
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock