Search the forum,

Discuss New plumber - Andy Intro! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
8
Hey guys,

My names Andy. I'm from Surrey. I decided it was time to make a change and take up something new, so I settled on plumbing :). I'm currently working through my 6035-L2 and really enjoying it, although still fairly early on. I'm working towards eventually getting the L3 and NVQ.

I have a lot of friends and family who work in various trades, so hoping that will make my transition from desk job easier. Unfortunately none are dedicated plumbers it seems, so I'd welcome any advise anyone can give about getting real life experience without fear of messing up whilst I'm studying.

Looking forward to hearing from you all soon!

Andy
 
Hello and welcome
 
Hi Andy ,Iam new to this forum stuff but it seems to be the way the worlds going.iam also just nearing the end of my 6035 L2,at the age of 53 it’s been a challenge to say the least.
 
Hi Andy ,Iam new to this forum stuff but it seems to be the way the worlds going.iam also just nearing the end of my 6035 L2,at the age of 53 it’s been a challenge to say the least.

Wishing you guys all the best, I don't think age will be a setback if you are dedicated to your learning. I was in a class myself with a couple of older guys and they were putting my work to shame! Are you planning on going down the self employed route when you finish your studies?
 
I am 28 years old and i find it very hard to find an apprenticeship as well,the young guys at the age of 16 to something like 18, 19 in my class in college have a great advantage over people like me because apprently if a company takes on a young guy,they can claim like 80% of money back(from government?),but if they take on people like myself,then they can't claim a single penny back.. so when they hear your age,they just get rid of you imediately,its not the right thing to do.. but like someone said that seems to be the way the worlds going.. im more than willing to volunteer in order to get my NVQ but that doesnt seem to work still
 

Reply to New plumber - Andy Intro! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
242
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
230
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock