Discuss New boiler before all rads fitted or not? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
12
Hi. I'm renovating a house and have replaced most piping.

The upstairs rads are fitted, but the downstairs is not as it's yet to be plastered. The pipes are just chased into the walls with Speedfit stop ends attached.

Can I go ahead and get the boiler replaced and the system working now and fit the downstairs rads later without many issues, or should I wait until the Joiners and plasterers have been and the whole system is installed?

Cheers,
David
 
Tbh upto you either is fine
 

Reply to New boiler before all rads fitted or not? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I have had a problem where 2 downstair radiators are not heating up the same as the rest of the radiators around the house, now previously i had...
Replies
2
Views
261
My Mother-in-law was quoted £1,000 by British Gas to do a power flush on her system as her rads aren't performing well. I was wondering, as 4...
Replies
3
Views
371
Hi, I'm studying plumbing and my work mate sized the opportunity to help him installing a new radiator. I'm looking for general advice which...
Replies
2
Views
564
Hi - I'm a reasonably experienced DIY plumber but just can't work out why the last new rad I've installed is cold - would really appreciate your...
Replies
7
Views
673
Hello, We had an extension built seven years ago. Initially the builders' plumber connected the heating to the house system but this didn't work...
Replies
23
Views
836
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock