Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Nest S Plan wiring into 2 port valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
13
Hello,

Looking at the nest s plan wiring diagram, what does the BW wire stand for on the 2 port valves?

Thanks!

upload_2017-11-18_20-32-39.png
 
That drawing is wrong

What set up do you have now ?
 
This is the one I use

IMG_1417.GIF
 
Status
Not open for further replies.

Reply to Nest S Plan wiring into 2 port valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Hi everyone, Just wanted to share my experience with "upgrading" an S plan setup to Opentherm and Vaillant Control Center (VR66). There are a few...
Replies
1
Views
1K
Hi Fellow Engineers I've attached a wiring diagram I've just completed, I wanted to make sure I've got it correct. Looking to install 2 Nest...
Replies
3
Views
377
  • Question
Hi guys, I have a set up with rads upstairs and UFH downstairs. I have installed the manifold for the UFH along with 2x Honeywell 2port values...
Replies
16
Views
2K
I have a home with an oil boiler in a garage turned into a flat, heating both flat and main house, running c plan with two pumps, two motorised...
Replies
0
Views
403
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock