Need help finding a fitting

[thedog123123]

I just moved into a flat with a 1.5 kitchen sink (1 1/2 pipes). The waste pipes are setup similar to this picture here:



Sadly, the piece that is circled was cut to short by over a 1/2 inch so it doesn't fit well into the bottom part of the piece. I went to try find a connector like that but I couldn't find one. I did find something similar but it has a male attachment at the top not a female which I need to connect to the sink basket.

w2w.diy.com/departments/floplast-waste-trap-height-adjustor/152689_BQ.prd (change the 2 to a w to view link in www)

I am a novice with plumbing and any help would be appreciated

 

[lame plumber]

take that picture to a merchant buy the whole thing keep the bit you need and bin the rest, you cant get the adjustable pipe separately

 

[plumben]

as above you'll need to buy a whole new trap or get a trap extension piece if it'll fit although i prefer less joints where possible

 

[buckley plumb]

Just fit 2 separate sink traps and tee pipework in

 

[Best]

Trap extension piece for a kitchen sink (1 1/2") will do no problem

 

[stevetheplumber]

usually its not cut to short but the pipe work isnt clipped and the weight drags it down