Discuss Mira Select - Low hot water pressure in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
Hello, looking for advice on this please, general direction of where to look. We have an unvented Megaflo and the pressure and temperature is perfect in every other shower and tap except this one. Think it's a Mira Select BIV but the name has rubbed off. Any pointers as to where I should start? Think it's the cartridge and if it is, which model number? Think it's been in since build in 2004ish.
 

Attachments

  • 2023-06-23 15.46.54.jpg
    2023-06-23 15.46.54.jpg
    139.3 KB · Views: 8
  • 2023-06-23 15.46.47.jpg
    2023-06-23 15.46.47.jpg
    134.2 KB · Views: 8
  • 2023-06-23 15.46.25.jpg
    2023-06-23 15.46.25.jpg
    151.5 KB · Views: 7

Reply to Mira Select - Low hot water pressure in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
345
Low hot water pressure Hi everyone, I'm hoping someone is able to shed some light on my situation before I have to call out the professionals...
Replies
5
Views
623
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and...
Replies
2
Views
505
losing pressure
L
Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
147
S
Pumps and low pressure I moved the bathroom to the back the house (next room) upstairs. I put in two pumps because low pressure water area. One...
Replies
1
Views
269
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock